Skip to content

Run barcode stock counts in Odoo without the clipboard

Your stocktake probably looks like this: print a count sheet, walk the shelves with a pen, then re-key every number into your system the next day. The re-keying introduces typos, the count is stale by the time it lands, and batch or lot details rarely make it onto the paper at all. A barcode count fixes the data-entry layer. This guide shows how to set it up in Odoo, what to check before you swap the clipboard for a scanner, and where the paper habit still creeps back in.

QITECH · Published · 5 min read
Sources checked

What a barcode count actually does

In Odoo, an inventory adjustment is the process of checking physical stock against the quantities recorded in your database. Regular checks keep records accurate and catch discrepancies early. Managers typically assign counts to staff, who walk to their locations, scan product barcodes, and record quantities as they go. [1]

The scanning can be done with a compatible barcode scanner or the Odoo mobile app, and the count is recorded in real time rather than written down and typed up later. [1] [2]

Treat scanning as removing the transcription step, not as a magic accuracy fix. Someone still has to count the shelf honestly and someone still has to review the adjustment before it is applied. [1]

Set up barcodes on products and locations first

Odoo's documentation is clear that before you can count with barcodes, both products and storage locations need barcodes set up in the system. The Barcode feature is enabled from the Inventory settings, which also installs the Barcode application. [1]

When you enable the scanner setting, Odoo adds a Barcode Nomenclature option where you choose between the default nomenclature and a GS1 nomenclature. This controls how the scanner interprets what it reads. [1] [2]

Our advice: label your locations even if your products already carry supplier barcodes. Scanning the shelf first pins every count to a place, which is what makes cycle counts and discrepancy hunting possible later. [1]

Bulk bins, repacked goods and unlabelled supplier items will not scan. Print your own internal labels for those rather than falling back to a manual sheet for the whole count. [1]

Assign the count, do not just hope someone does it

In Odoo, a manager can assign counting tasks from Inventory, Operations, Physical Inventory by selecting specific locations and products and assigning a user. That user then sees pending counts when they open the Barcode app, with the number of products to count shown on the Count Inventory button. [1]

Use this assignment feature for small weekly cycle counts of fast-moving lines instead of one giant annual stocktake. A Friday count of a single aisle is easier to staff, easier to check, and discrepancies surface while the trail is still warm. [1]

Odoo also has a Count Entire Locations feature that assigns a user to count everything in a location once they scan that location's barcode. It requires storage locations to be enabled, and it helps cycle counts by showing missing or misplaced products. [1]

Hide the expected quantity

By default, Odoo does not display the expected quantity during a barcode count, because showing it leads people to trust the screen instead of counting. A manager can deliberately switch on Show Expected Quantity when requesting a count, but it is off unless chosen. [1]

Keep it off. A blind count, where the person counts what is actually on the shelf and enters what they find, is more honest than a confirm-the-number count. If your counts always match the system perfectly, that is a sign people are copying the screen, not counting. [1]

Running the count on the floor

The documented routine is: open the Barcode app, tap Count Inventory, walk to the location, scan the location barcode, then scan each product's barcode. Scanning the same product multiple times increases its counted quantity, and there is an edit screen with a keypad and plus and minus buttons for corrections. [1]

If a barcode is missing or damaged, Odoo Barcode still supports manually adding a product, quantity and location rather than abandoning the count. [1] [2]

For example, picture a small food distributor counting a dry-goods shelf. The picker scans the shelf label, then scans each carton of sauce bottles: three scans records three units. One carton has a torn label, so they use the add-product screen for that one line only. At the end they tap confirm and the system drafts the adjustment for the supervisor to review. Nothing is written on paper, so nothing needs re-keying on Monday. [1]

Finish with a review step, not auto-apply

Odoo's documentation says to review all counted entries before completing an adjustment, then confirm. There is even a Validate barcode that can be scanned instead of tapping the confirm button, and the app shows a banner once the count is updated. [1]

Make the review a named person's job. Big differences between counted and recorded quantities usually mean a mis-scan, a wrong location or an unrecorded delivery, and those are cheaper to investigate before the adjustment is applied than after. [1]

If you track lots or batches, check that lot tracking is actually configured on your key products first. Scanning alone does not create traceability; the lot data only flows through if the system is set up to capture it. [1] [3]

Sensible hardware and honest limits

Odoo points users to a hardware page listing compatible barcode scanners for the Inventory and Barcode apps, and the Barcode app ships with printable demo barcodes so you can test the workflow before buying anything. [1]

Odoo states its barcode scanner works offline and supports barcode, QR code and GS1 formats, and is designed to cope with products that have no barcode. [3]

Recommendation: start with the demo sheet and a phone or one cheap scanner on a single aisle. Prove the routine works in your coolroom or wet areas before rolling hardware out across the warehouse. Barcodes cut the typing, but they will not fix a location layout nobody understands or counts nobody reviews. [1] [3]

Sources & further reading

  1. Adjust inventory with barcodes — Odoo 20.0 documentation
  2. Apply inventory adjustments with barcodes — Documentation Odoo 15.0
  3. Inventory management software | Odoo

Found something that needs updating? Let us know. We welcome corrections.

← More practical guides · Our editorial approach